Hearth & Home Technologies 8300 Manual De Usuario
HearthStone Quality Home Heating Products Inc
Champlain
Model #8300
10
will stay on constantly, and the
thermostat will not operate. When the
switch is in the “T-STAT” position, it
will operate via the thermostat, running
only when the thermostat “calls” for
heat. When the switch is in the “OFF”
position, the pilot remains lit but the unit
can not operate, as the main burner can
not light.
thermostat will not operate. When the
switch is in the “T-STAT” position, it
will operate via the thermostat, running
only when the thermostat “calls” for
heat. When the switch is in the “OFF”
position, the pilot remains lit but the unit
can not operate, as the main burner can
not light.
D. THERMOSTAT
The unit may be controlled
automatically via the wall-mounted
thermostat. By setting the ON/OFF/T-
STAT switch to “T-STAT”, and setting
the desired room temperature, the unit
will cycle on and off as needed to
maintain the requested temperature.
automatically via the wall-mounted
thermostat. By setting the ON/OFF/T-
STAT switch to “T-STAT”, and setting
the desired room temperature, the unit
will cycle on and off as needed to
maintain the requested temperature.
E. REMOTE CONTROL (w/o thermostat)
The unit may also be partially controlled
via the OPTIONAL remote control, Kit
#90-56912. When the ON/OFF/T-STAT
switch is in the “ON” position, it allows
you to turn the stove “On” & “Off” from
anywhere in the vicinity of the unit, and
is available through your local
HearthStone dealer.
via the OPTIONAL remote control, Kit
#90-56912. When the ON/OFF/T-STAT
switch is in the “ON” position, it allows
you to turn the stove “On” & “Off” from
anywhere in the vicinity of the unit, and
is available through your local
HearthStone dealer.
F. REMOTE CONTROL (w/thermostat)
The unit may also be fully controlled via
the OPTIONAL REMOTE CONTROL
w/thermostat, available through your
local HearthStone dealer Kit #90-56914.
When the ON/OFF/THERMOSTAT
switch is in the “ON” position, this
Remote allows you to turn the unit “On”
& “Off” and also allows you to control
the temperature of the stove from
anywhere in the vicinity of the unit.
the OPTIONAL REMOTE CONTROL
w/thermostat, available through your
local HearthStone dealer Kit #90-56914.
When the ON/OFF/THERMOSTAT
switch is in the “ON” position, this
Remote allows you to turn the unit “On”
& “Off” and also allows you to control
the temperature of the stove from
anywhere in the vicinity of the unit.
G. BLOWER
The unit may be equipped with an
OPTIONAL blower fan, available
through your local HearthStone dealer.
OPTIONAL blower fan, available
through your local HearthStone dealer.
The fan helps to circulate heat away
from the stove.
from the stove.
Note: the ON/OFF/T-STAT switch or the
THERMOSTAT controls the on/off cycling
of the main burners, but the pilot remains lit
regardless of any of the control settings (B-
G) listed previously,
except the
ON/OFF/PILOT control knob, which is the
only way to turn the pilot off. Turning the
gas control knob fully clockwise to the
"OFF" position will turn off the pilot.
During the summer, non-heating season,
switch the wall thermostat and rocker
switches to “OFF”, and turn off the pilot.
This will improve the overall efficiency of
the unit, as the heat from the pilot is not
wanted in the summer. When putting the
unit back into service follow the “Lighting
of the Unit” portion in the “How To Turn
On & Off” section of this manual.
When the unit is first lit, especially when
cool, it is normal to experience some
condensation on the inside of the glass
window. This condensation will burn off
within the first few minutes of operation. If
continuous condensation or water drips are
noted from any part of the unit, immediately
discontinue operation of the unit and contact
a qualified service technician.
only way to turn the pilot off. Turning the
gas control knob fully clockwise to the
"OFF" position will turn off the pilot.
During the summer, non-heating season,
switch the wall thermostat and rocker
switches to “OFF”, and turn off the pilot.
This will improve the overall efficiency of
the unit, as the heat from the pilot is not
wanted in the summer. When putting the
unit back into service follow the “Lighting
of the Unit” portion in the “How To Turn
On & Off” section of this manual.
When the unit is first lit, especially when
cool, it is normal to experience some
condensation on the inside of the glass
window. This condensation will burn off
within the first few minutes of operation. If
continuous condensation or water drips are
noted from any part of the unit, immediately
discontinue operation of the unit and contact
a qualified service technician.
R
OUTINE
M
AINTENANCE
AND
C
ARE
The Champlain requires minimal routine
maintenance and care. The unit should
always be cool and off when being cleaned.
maintenance and care. The unit should
always be cool and off when being cleaned.
C
LEANING
› WARNING: Do not clean the unit
when hot. The unit should receive
regular cleaning on, under, and around
the stove to prevent the buildup of dust
regular cleaning on, under, and around
the stove to prevent the buildup of dust