Hearth & Home Technologies 5100I-NL-B Manual De Usuario

Descargar
Página de 44
5100-I  ACT WOOD INSERT
Page
September 1, 2008
438-0380D
1
Listing and Code Approvals
The Quadra-Fire 5100-I ACT Wood Inserts  meets the U.S. 
Environmental Protection Agency’s 1990 particulate emis-
sion standards.
MODEL: 
5100-I ACT Wood Insert
LABORATORY:  OMNI Test Laboratories, Inc.
REPORT NO. 
061-S-59-2
TYPE: 
Wood Stove
STANDARD: 
UL18 and ULC S68 and (UM)  
 
 
8-HUD, Mobile Home Approved.
A.  Appliance Certification
C.  Glass Specifications
D.  BTU & Efficiency Specifications
This appliance is equipped with 5mm ceramic glass.  
Replace glass only with 5mm ceramic glass.  Please 
contact your dealer for replacement glass.
1.98 grams/hour
75.5% on Medium
50,800
up to ,500 sq ft
21 inches
3.0 cubic feet
520 lbs
EPA Certified
Efficiency
BTU - EPA
Heating Capacity
Maximum Log Length
Firebox Capacity
Weight
This  appliance  is  approved  for  mobile  home  installations
when not installed in a sleeping room and when an outside
combustion air inlet is provided. The structural integrity of
the mobile home floor, ceiling, and walls must be maintained.  
The appliance must be properly grounded to the frame of the
mobile home and use only listed double-wall connector pipe.
An Outside Air Kit comes standard on the appliance and must
be installed in a mobile home installation.
B.  Mobile Home Approved
NOTE: Hearth & Home Technologies grants no war-
ranty, implied or stated, for the installation or mainte-
nance of this unit and assumes no responsibility for
any consequential damage(s).
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage. Refer
to the owner’s information manual provided with this appli-
ance. For assistance or additional information consult a 
qualified installer, service agency or your dealer.
WARNING
NOTE:  This installation must conform with local codes.
In the absence of local codes you must comply with the
UL1482, (UM) 84-HUD and NFPA211 in the U.S.A. 
and the
ULC S628 and CAN/CSA-B365 Installation 
Codes in Canada.