FireplaceXtrordinair 36A-BI Manual De Usuario
Page 24
REPLACEMENT PARTS AND REMOVAL INSTRUCTIONS
Several components inside your appliance are serviceable by you. These components are
usually easy to remove and replace without special tools. Before you attempt to carry out any
of these steps, be sure to read through the entire section. To order new parts, use the chart
below to order the appropriate part number through your dealer. Use only parts from your
dealer made specifically for your appliance.
usually easy to remove and replace without special tools. Before you attempt to carry out any
of these steps, be sure to read through the entire section. To order new parts, use the chart
below to order the appropriate part number through your dealer. Use only parts from your
dealer made specifically for your appliance.
Replacement Parts
Part Name
Part Number
Part Description
Door Gasket (includes adhesive)
92-7355
5/8" x 1/16" White Gasket
Door Glass (includes gasket)
92-7370
Lined with black gasket
Door Handle
92-7300
Phenolic
Firebrick (note size)
See Removal and Replacement
Instructions.
4 1/2" x 9" x 1 1/4" Un-Cut
Catalytic Combustor with Gasket
92-7405
See Below
By-Pass Damper Knob
92-7275
Black Phenolic
Owner's Manual
92-7505
This Manual
Fiberglass Rope for Glass
92-7382
1/2" Round White Gasket
Installation Manual
92-7515
Included with stove.
Blower Filter
92-7444
Filters Dirt Particles
Catalytic Combustor Replacement Information
The catalytic combustor supplied with this appliance is a Corning, Inc. Model 3.125 X 14.25 X
3-16, cell density = 16 per square inch. Consult the combustor warranty supplied with this
appliance. Warranty claims for the combustor should be addressed to:
3-16, cell density = 16 per square inch. Consult the combustor warranty supplied with this
appliance. Warranty claims for the combustor should be addressed to:
Corning, Incorporated
Technical Products Division
Corning, New York 14831
(607) 974-9000
Technical Products Division
Corning, New York 14831
(607) 974-9000
If you have any warranty questions concerning your combustor please direct your questions
to Corning, Inc. You will be given information about how to package and return your
combustor.
to Corning, Inc. You will be given information about how to package and return your
combustor.
Removal Instructions
The remaining text in this section details the items below. Make sure to follow the directions
closely when performing one of the procedures. If re-assembly directions are not given with
the instructions, re-assemble by following the directions in reverse order. All of these
procedures can be done without special tools.
closely when performing one of the procedures. If re-assembly directions are not given with
the instructions, re-assemble by following the directions in reverse order. All of these
procedures can be done without special tools.
¥ Removing and Replacing the Glass
¥ Removing and Replacing the Door Gasket
¥ Removing and Replacing the Firebricks
¥ Removing and Replacing the Catalytic Combustor