Grace GDI-IRA500 Manual De Usuario

13 
 

Back Panel connections 

 

There are three connections on the back panel.  

1)  The jack for the power adapter. Please plug the supplied power adapter into the radio’s power 

adapter jack then plug the other 2 prong end into the wall. 

 

2)  Stereo headset jack connection. The headset jack connection can be used to listen to music 

in private via your personal headset/headphones (not provided). 

 

3)  Stereo RCA jacks. These connections connect to your stereo’s audio input jacks or powered 

speakers. 

 

 

 

Steps for Connecting Your Radio to Your Wireless 
Network 

Getting Started 

 

 
Step 1 - Power up the radio - 1

st

 time set up 

Connect one end of the AC Power cord to the back of your SOLO and the other end to the available wall 
plug. The radio can be switched on or off with the STANDBY/ON button.  The STANDBY/On button is 
marked on your radio with this symbol

. 

If only the clock is displayed on the top of the display, the unit 

is in standby mode. Please turn the radio on before going to the next step.  

 

CAUTION: Use only the power adapter supplied with SOLO.  Connecting a power supply with a different 
rating will cause permanent damage to SOLO and may be hazardous and will void the warranty.  

 

   
After you turn the radio on it will briefly display the following: 
 

  

Grace Digital Radio 

 

          

After a few seconds, the screen will change to show: