Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Chief Manufacturing
  4. FDP Series
  5. Prospecto

Chief Manufacturing FDP Series Prospecto

Descargar
Página de 2
 
8803-000033 
 
  01/26/04 
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com 
INSTALLATION INSTRUCTIONS 
FDP SERIES 
SMALL FLAT PANEL DISPLAY 
DUAL SCREEN POLE MOUNT  
Exclusive Q2™ Mounting System 
Prior to assembly, unpack carton completely and verify contents. 
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480. 
 
 
(2) FDP Pole-Mounting Bracket Half 
 
(2) ¼” Flat Washer 
(2) ¼-20 X 4.25” Hex Bolt 
(8) 10-24 X 1.00 Thread Forming Screw 
 
(8) ½” X ½” Nylon Spacer 
 
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY 
The FSP will fit on any 1/1/2” to 2” O.D. pipe including 1 ½”NPT. 
Flat Panel Displays are Extremely Fragile. 
If Monitor Uses a Screw Size Other Than M4 X 10mm (M4 X 20mm), 
DO NOT USE M4 Screws Provided. Monitor Damage Could Occur. 
Interface Bracket Installation: 
1.  See installation procedures accompanying your mounting bracket. 
Optional Latching Flag Placement: 
1.  Remove Phillips head screw, Nylock nut and latching flag (see Figure 2). 
2.  Reposition latching flag and secure using Phillips head screw, Nylock nut. 
Figure 1 
Figure 2 
CAUTION!
 
Remove screw 
and nut 
Move latch