Runco LS-10I Manual De Usuario
Runco LS-10i Installation/Operation Manual
9
PRE
L
IMINAR
Y
9.
TRIGGER 2 (3.5-mm, mini phono jack)
Provides 12 (+/- 1.5) volt switched output for an anamorphic lens transport (if
installed) or screen relays with 250mA current capacity and short protection.
Provides 12 (+/- 1.5) volt switched output for an anamorphic lens transport (if
installed) or screen relays with 250mA current capacity and short protection.
10. TRIGGER 1
Provides 12 (+/- 1.5) volt switched output for an anamorphic lens transport (if
installed) or screen relays with 250mA current capacity and short protection.
installed) or screen relays with 250mA current capacity and short protection.
11. RS-232
A female, 9-pin D-sub connector for interfacing with a PC or home theater
automation/control system.
automation/control system.
2.3
LS-10i Remote Control
LS-10i Remote Control
1.
LIGHT
Press to illuminate the
buttons.
Press to illuminate the
buttons.
2.
ON / OFF
Use these buttons to
turn the projector on or
off.
Use these buttons to
turn the projector on or
off.
3.
Source Selection
Buttons:
Buttons:
VID
Press to select
Composite video input
as the source.
Press to select
Composite video input
as the source.
S-VID (S-Video)
Press to select the
S-Video input as the
source.
Press to select the
S-Video input as the
source.
HDMI 1 / HDMI 2
Press to select an HDMI
input.
Press to select an HDMI
input.
HD 1 / HD 2 / HD 3
Press to select the
“HD 1,” “HD 2” or “HD 3”
video input as the
source. By default, these
buttons are assigned to
the COMPONENT 1,
COMPONENT 2 and RGB video inputs respectively; however, you can re-assign
these buttons to other inputs.
Press to select the
“HD 1,” “HD 2” or “HD 3”
video input as the
source. By default, these
buttons are assigned to
the COMPONENT 1,
COMPONENT 2 and RGB video inputs respectively; however, you can re-assign
these buttons to other inputs.
You can also assign these buttons to the Picture-in-Picture (PIP) function. For more
information, refer to HD 1 Key / HD 2 Key / HD 3 Key on page 66.
information, refer to HD 1 Key / HD 2 Key / HD 3 Key on page 66.
FOCUS
LENS
ZOOM
LIGHT
OFF
ON
VID
S-VID
HDMI 1
HD 2
SOURCE
PICTURE MEMORY
ASPECT RATIO
HD 1
INFO
ENTER
EXIT
MENU
BRT
CUST1
ISF
NIGHT
ISF
DAY
CUST2
CONT
COL
TINT
HD 3
HDMI 2
16:9
VWIDE
LBOX
4:3
CINEMA
VCINE
FOCUS
ZOOM
2
1
5
4
6
3
9
8
0
7
LENS
6
1
5
2
4
3
8
7
9