Runco SC-35d Manual De Usuario

Place the projector upside down on a 
blanket or other soft surface. Use a 
Phillips screwdriver to loosen the 
screws attaching the two front feet to 
the projector. Then, remove the feet.

Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, the 
adapters bring the attachment points for the projector mounting rails (included with the 
projector ceiling mount kit) from the bottom of the projector up above the AutoScope lens 
motor housing. For floor installations (where the projector is upright), the adapters allow 
the projector to lie flat on the mounting surface.

Using eight (8) each of the supplied, Pan-Head Phillips screws, attach the AutoScope 
Ceiling Mount Adapters/Projector Stands to the projector as shown in Figure 3-7.