Runco Home Theater Projection System Manual De Usuario

Use the controls in the Picture Menu to calibrate each Dimension Digital Controller input to 
achieve optimum picture quality.

The Dimension Digital Controller has been designed to incorporate setup and calibration 
standards established by the Imaging Science Foundation (ISF). The ISF has developed 
carefully crafted, industry-recognized standards for optimal video performance and has 
implemented a training program for technicians and installers to use these standards to 
obtain optimal picture quality from Runco video display devices. Accordingly, Runco 
recommends that setup and calibration be performed by an ISF certified installation 
technician.

All signal types require separate processing. Therefore, you need to calibrate each 
Dimension Digital Controller input separately. 

Although it may be possible to obtain satisfactory picture quality using the naked eye and 
regular program material, Runco recommends using an external test pattern source 
(Ovation Multimedia, Digital Video Essentials or AVIA test DVD or equivalent) for best 
results.

Connect your test pattern source to the input that you are calibrating and proceed as 
follows. Perform the adjustments in the order listed here.

When you change a picture quality setting, save the change to a 
preset afterwards. Otherwise, the change will be lost when a 
different input is selected. (Picture quality settings are saved for 
each input and display mode separately.) For information about 
saving settings, refer to Memory Presets on page 70.