Runco RS-900 Series RS1100 Series Guía Del Usuario
36
RS-900 and RS1100 Series Installation/Operation Manual
PRE
L
IMINAR
Y
Connecting 12-Volt
Trigger Output to External
Theater Equipment
If you are installing an RS-900/CineWide with AutoScope, RS1100/CineWide with
AutoScope or RS1100 Ultra/CineWide with AutoScope, use the cable supplied with the
AutoScope Lens Motor to connect the motor to the 12-volt trigger output as shown in
Figure 3-18.
AutoScope or RS1100 Ultra/CineWide with AutoScope, use the cable supplied with the
AutoScope Lens Motor to connect the motor to the 12-volt trigger output as shown in
Figure 3-18.
Figure 3-18. Connecting the 12-Volt Trigger Output to the AutoScope Lens Motor
If your home theater contains a retractable screen, screen mask or other 12-volt
trigger-activated equipment, connect it to the 12-volt trigger output as shown in Figure
3-19.
trigger-activated equipment, connect it to the 12-volt trigger output as shown in Figure
3-19.
Figure 3-19. Connecting the 12-Volt Trigger Output to Other Equipment
➤
AutoScope
Lens Motor (Rear)
S-VID /
S-VID
AC Input
Power
Switch
3.5-mm
mini plug
mini plug
S-VID /
S-VID
to other,
12-volt
trigger-activated equipment
(screen, screen mask etc.)
Red = +12V (Tip)
Black = Ground (Sleeve)
3.5-mm
mini plug
mini plug