Runco SC-60D Manual De Usuario

By default, the SC-50d/SC-60d is configured for a “floor/front” installation, in which the 
projector is installed upright and in front of the screen. If it is installed behind the screen 
and/or mounted on a ceiling, you must change the picture orientation. To do this:

1.

On the DHD Controller remote control or front panel, press MENU.

2.

Select Service from the Main Menu and enter the Service Menu passcode. 

3.

Select Display Device from the Service Menu.

4.

Select Configure from the Display Device menu, then select Installation.

5.

Select Orientation, then choose Floor/Rear, Ceiling/Front or Ceiling/Rear, to match 
the installation method.