Eureka! Tents 2900 Manual De Usuario
9
www.eureka.com
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
CAUSE
SOLUTION
Motor will not start.
Electric Plug
q
Push plug securely into outlet.
q
Try another outlet.
q
Check circuit breaker.
Motor suddenly stops.
Thermal Cut Off
q
Page 2.
Does not clean the carpet or floor.
Filters
Dust Bag
Hose
Belt
Brushroll
q
Clean or replace the filters.
Hint: If picking up
fine dust, the filters may
not look dirty but a
fine substance tends to reduce suction when it
blocks the airflow through the filter(s). Page 5.
q
Replace the dust bag with a new dust bag.
Page 6.
Page 6.
q
Be sure the dust bag is properly seated into the
cleaner body. Page 6.
cleaner body. Page 6.
q
Be sure hose adapter is secure on back of
cleaner. Page 8.
cleaner. Page 8.
q
Remove any blockages from the hose that
restricts the airflow. Page 8.
q
Check to see that the end of the hose is firmly
pressed into the hose retainer in the hood of
the vacuum.
the vacuum.
q
Check base hose and long hose. Page 8.
q
Replace a broken, cut, loose or out of shape
belt.
belt.
q
Clean hair and thread from bristles and end
cap area. Replace brush roll if bristles are worn.
cap area. Replace brush roll if bristles are worn.
No suction at the end of hose.
Hose Adapter
Filters
Filters
Hose
Dust bag
q
Be sure hose adapter is secure. Page 8.
q
Clean or replace the filters.
Hint: If picking up
fine dust, the filters may not look dirty, but a
fine substance tends to reduce suction when it
blocks the airflow through the filters.
q
Remove any clogs from the hose that restricts
the airflow. Check base hose and long hose.
Page 8.
q
Change dust bag.
Headlight not working.
Light Bulb
q
Replace light bulb. Page 7.
Noise from the brush roll area.
Brush Roll
Belt
q
Remove hood and clean debris or items from
the brush roll area.
the brush roll area.
q
Replace a broken, cut, loose or out of shape
belt. Page 6.
belt. Page 6.
Cleaner is hard to push.
Cleaner Height Setting
Belt
q
Put handle in operating position. Tilt the cleaner
back to raise the front wheels off floor. Then turn
the knob to a higher setting.
q
Replace a broken, cut, loose or out of shape
belt. Page 6.
belt. Page 6.
Cleaner height knob will not turn
Cleaner Height Setting
q
Hint: Put handle in operating position. Tilt the
cleaner back to raise the front wheels off floor.
Then turn the knob.
Questions?
Call 1-800-282-2886 between 8 a.m. to 7:30
p.m., (CST), Monday - Friday and 10 a.m. to
6:30 p.m. (CST) Saturday and Sunday. Know
the model and serial numbers when you call.
p.m., (CST), Monday - Friday and 10 a.m. to
6:30 p.m. (CST) Saturday and Sunday. Know
the model and serial numbers when you call.