NAD T550DVD Manual De Usuario
PAGE 19
CONNECTIONS
Connecting to Optional Equipment
Enjoying 2 Channel Digital Stereo Sound
Amplifier equipped with
a digital audio input
a digital audio input
Front speaker
(Right)
(Right)
Front speaker
(Left)
To Digital Audio Input
TV
To S-Video Input
or Video Input
To S-video Out
or Video Out
or Video Out
75 ohm coaxial cable
To Digital Out
(COAXIAL or
OPTICAL)
(COAXIAL or
OPTICAL)
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver
equipped with a digital audio input and speaker system (right and left front speakers).
equipped with a digital audio input and speaker system (right and left front speakers).
DTS Sound
“DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.
Amplifier equipped
with a DTS decoder
with a DTS decoder
Front
speaker
(Left)
speaker
(Left)
Rear speaker
(Left surround)
Rear speaker
(Right surround)
(Right surround)
Sub woofer
Front
speaker
(Right)
speaker
(Right)
Center
speaker
speaker
To Digital Audio Input
TV
To S-Video Input
or Video Input
To S-video Out
or Video Out
or Video Out
75 ohm coaxial cable
To Digital Out
(COAXIAL or
OPTICAL)
(COAXIAL or
OPTICAL)
Like Dolby Digital, DTS is a multichannel digital format with 6 discrete channels of sound. Some DVDs are
encoded using the DTS system. Although the NAD T550 doesn’t decode a DTS encoded DVD, it will pass on the
DTS digital signal through either the coaxial or optical digital output.
Connect either the coaxial or optical digital output to a decoder or receiver (such as the NAD T760) capable of
decoding DTS signals.
encoded using the DTS system. Although the NAD T550 doesn’t decode a DTS encoded DVD, it will pass on the
DTS digital signal through either the coaxial or optical digital output.
Connect either the coaxial or optical digital output to a decoder or receiver (such as the NAD T760) capable of
decoding DTS signals.
Notes
Refer to the owner’s manual of your audio receiver as well.
When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the
equipment from the wall outlet before making any connections.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a
moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver
power on, the speakers may be damaged.
To listen to the DTS audio CDs, you have to select AUDIO mode to “Stereo”. (Refer to page 24)
When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the
equipment from the wall outlet before making any connections.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a
moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver
power on, the speakers may be damaged.
To listen to the DTS audio CDs, you have to select AUDIO mode to “Stereo”. (Refer to page 24)