Crosley Radio CR2402A Manual De Usuario

8

7

Antenna: for FM reception, the unit is provided with

a FM WIRE ANTENNA (43) , move the wire until

the reception is clear and with no interferences. For

AM reception, the unit is provided with a directional

build-in ferrite antenna. Rotate the set to find the

position in which the best reception is obtained. Do
not connect the EXTERNAL FM ANTENNA (43) to

any outside antenna.

1

Make sure the unit is plugged in correctly to an

AC outlet.

2

Press the POWER button (15/45) to turn on the

unit .

3

Once the power is turned on, press the 

FUNCTION button (4/68) to switch between 

CD/Tuner/Phono/Aux. When switching between

functions, wait one second after pressing the 

function button before pressing it again. This 

gives the unit time to load the correct information

for the selected function.

Basic Operation

1

Press the FUNCTION button (4/68) to set the 

unit to Tuner mode

2

Press the BAND button (3/58) to select the 

desired tuning band (AM/FM).

3

Select the desired radio station by rotating

TUNING KNOB (21).

4

Adjust the volume to the desired listening level.

1

Press the FUNCTION button (4/68) to set the

unit to Phono mode.

2

Set the SPEED CONTROL SWITCH (32) to 

the correct speed (331/3, 45 or 78 rpm) for the

selected record.

3

Use the CUE LEVER (30) to raise the tone arm

off its rest. Move the tone arm over the record

and use the cue lever to lower it to the point 

you want the record to start.

4

At the end of the record, the tone arm will return

to its rest.

NOTE:The turntable and cassette players both operate

in the same mode. Make sure the cassette 

player is in STOP mode when listening to a 

record.

To play the 45rpm record, place the ADAPTER (44)

on the spindle.

Basic Operation

1

While in Phono mode, press the

STOP/EJECT(35) button on the cassette player

to open the cassette door.

2

Insert a prerecorded cassette tape into the 

cassette door.

3

Press the PLAY button (38) to begin play.

4

To stop playback, press the STOP/EJECT (35)

button.

5

Press the STOP/EJECT (35) button again to 

eject the cassette.

1

While playback is stopped, press the FAST 

FORWARD (36) or REWIND (37) button to fast

forward or rewind the cassette.

2

Once the desired position is reached on the 

cassette, press the STOP/EJECT (35) button 

to stop the cassette.

3

Press the PLAY (38) button to begin play.

NOTE: 

The cassette player plays the side of the

cassette facing away from the unit. To 

play the other side of the cassette, you

 

must eject the cassette and turn it over.