Sunfire Series II Manual De Usuario

5

User's Manual

Your Cinema Grand Amplifier should

reach you in perfect condition. If you do notice
any shipping damage, please contact your
Sunfire Dealer immediately.

Gently lift out the unit and remove all the

packing material and accessories. It is
important to save all the packing materials
and the box in case your amplifier ever needs
to be moved or shipped for repair.

Make sure that you keep your sales

receipt. It is the only way to establish the
duration of your Limited Warranty and it may
come in useful for insurance purposes.

Please make a note of your serial number

located on the rear panel:

Serial #:

___________________________

Purchased at:

___________________________

___________________________

___________________________

Date: _______________________

Unpacking

Unpacking and Specifications

© 2001 Sunfire Corporation.
All rights reserved. Sunfire Corporation
reserves the right to improve its products at
any time. Therefore, specifications are subject
to change without notice.
Manual part number : 913-034-00 Rev A

Specifications

Power output

Power at clipping, minimum:

850 watts per channel into four ohms.
1700 watts per channel into two ohms
(time limited basis).

Hum and Noise

-103 dB, A-Weighted

Maximum output current

120 amperes peak to peak per channel

Maximum output voltage

58 Vrms

Output impedance Front Left
and Front Right channels

Voltage source: Approx zero
Current source: Approx one ohm

Input impedance, RCA input

24k

Ω

Input sensitivity for rated output

Unbalanced:  2.0 Vrms
Balanced:      1.0 Vrms

Input impedance, XLR input

24k

Ω, each leg balanced to ground

Female XLR
Pin 1 is ground
Pin 2 is negative (cold)
Pin 3 is positive (hot)

Dimensions

19.0 inches wide
6.5 inches high (including feet)
16.75 inches deep (including connectors)

Weight

45 lbs

Finish

Brushed aluminum and black anodize