Lexicon 284 Manual De Usuario

Descargar
Página de 23
Signature 284 User Guide
5
Getting the Tone You Want
The  sonic  signatures  of  many  different  guitar  sounds  are  based  on
power amp behavior as much as preamp gain and tone settings.
For modern high gain tones, use Gain Boost (pull out the Gain knob) to
get lots of preamp distortion, but keep the power amps clean by setting
the  knob  no  higher  than  4  or  so.  This  will  deliver  a  smooth,  tight
distortion with lots of definition.
Front Panel Controls
For vintage blues tones, keep the Gain in Normal mode (pushed in), but
crank it up to 7 or so to push the power amps harder. You’ll notice that
the amount of “sag” (power amp compression) increases as you turn
the Volume controls beyond 5. When set up this way, the Signature 284
is most responsive to nuances of touch and style —  the tone is totally
authentic, the voice is yours alone.
For tones that emphasize the Class “A” characteristics of the power
amps, keep the  Gain in Normal mode (pushed in) and set it below 5.
Dial  in  some  power  amp  distortion  by  setting  the  Volume  controls
above 5. Pushing the power amps this way creates a throaty quality —
you’ll also notice that the tone controls are very responsive when the
amp is used this way.