CyberData Part #010861 Manual De Usuario
Installing the VoIP Loudspeaker Amplifier
Loudspeaker Amplifier Setup
VoIP Loudspeaker Amplifier Operations Guide
930106C
CyberData Corporation
9
See
for details about connecting the loudspeaker amplifier.
2.2.3.1 Loudspeaker Type
The CyberData VoIP Loudspeaker Amplifier supports an 8 Ohm Bogen or equivalent unamplified
loudspeaker. See
loudspeaker. See
Figure 2-4. Hornspeaker
2.2.3.2 Cabling/Wiring
You may connect a loudspeaker to a loudspeaker amplifier with a good quality speaker cable that is
limited to 25 feet in length.
limited to 25 feet in length.
Table 2-5. Loudspeaker Amplifier Connections
Connection
Connection Details
Location
Loudspeaker
●
Use two binding posts for up to 0.083 inch
diameter loudspeaker wire.
diameter loudspeaker wire.
VoIP paging amplifier
Ethernet
●
Use a RJ 45 cable.
VoIP paging amplifier
AC
a
a.Consult a licensed electrician for local electrical code requirements.
●
For a phase connection, use a press-down
connector for 14 AWG solid copper wire.
connector for 14 AWG solid copper wire.
●
For a neutral connection, use a press-down
connector for 14 AWG solid copper wire.
connector for 14 AWG solid copper wire.
●
For an earth/ground connection, use a screw-
down connector for 14 AWG solid copper wire.
down connector for 14 AWG solid copper wire.
AC panel