CyberData 930095K Manual De Usuario

CyberData Corporation

930095K

Operations Guide

 Installing the VoIP Ceiling Speaker

 

Speaker Setup

8

2.2.3 Confirm the IP Address, Test the Audio, and Check the Volume 

When the speaker is operational and linked to the network, use the Reset Test Function 
Management (RTFM) switch (

) on the speaker face to announce and confirm the speaker’s 

IP Address, test that the audio is working, and check the volume.

To announce a speaker’s current IP address: 

1. Press and hold the RTFM switch until it beeps (after one second). 

2. Release the switch to hear the IP address announcement, and check the speaker volume.

The speaker will announce it's default IP address (192.168.3.10).

Pressing and holding the RTFM switch for longer than 20 seconds will restore the 

speaker to the factory default settings. See 

.

RTFM switch