CyberData 930095K Manual De Usuario
CyberData Corporation
930095K
Operations Guide
Installing the VoIP Ceiling Speaker
Configure the Speaker Parameters
12
2.3.2 Configure the Network Parameters
1. Click the Network Setup button to open the Network Setup page (
).
Figure 2-7. Network Setup Page
2. On the Network Setup page, enter values for the parameters indicated in
Table 2-5. Network Setup Parameters
Web Page Item
Description
IP Addressing*
Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
. If you select DHCP,
.
IP Address*
Enter the Static IP address.
Subnet Mask
Enter the Subnet Mask address.
Default Gateway
Enter the Default Gateway address.
DNS Server 1*
Enter the DNS Server 1 address.
DNS Server 2*
Enter the DNS Server 2 address.
Click this button to save your configuration settings. Changing a
parameter that has an asterisk next to it will cause a system reboot
when saved.
parameter that has an asterisk next to it will cause a system reboot
when saved.