Crosley Radio CR12-10 Manual De Usuario

Control Locators

Unit Controls.......................... 4
Remote Controls.................... 5

Getting Started

Unpacking.............................. 6
Power Source......................... 6

Base Operation

CD Operation......................... 7-8
Radio Operation..................... 9-10
iPod Operation....................... 11
Remote Control...................... 12

General

Connection Optional 
Equipment.............................. 13
Light / Bubble Tubes.............. 13
Troubleshooting .................... 14
Warranty................................. 15

Thank you for purchasing the Crosley 10 CD Jukebox

with iPod (CR1201A).  Before operating this unit,

please read this manual thoroughly and retain it for

future reference.

Instructions in this manual describe the control functions

of the Crosley 10 CD Jukebox with iPod(CR1201A).

About This Manual

Welcome

Table of Contents

12

The remote will control the following functions on

the CR1201A:

1

Power(47): Press to turn the Jukebox On / Off.

2

Mode(30): the mode button selects between 

the CD Player or AM/FM Radio mode.

3

Mute(37): Press mute to silence the sound from

either the CD Player or AM/FM Radio. Press 

again to restore sound to previous level.

4

Band(32): The band button is used to navigate

through and select the band options,FM 1, FM2,

FM3, AM 1 or AM 2. Press repeatedly to move

through the selections.

5

Backward Skip(34) : Press to skip back to the

previous track in CD Player mode or to tune 

down in frequency in the AM/FM radio mode. 

Press and hold the skip back button for at least

1 second to seek back to the first station with a

strong signal. However the seek will miss many

of the weaker stations. Repeatedly press the 

Tune or Skip button to find the most stations.

6

Forward Skip(45): Press to skip forward to the

next track in CD Player mode or to tune up in 

frequency in the AM/FM radio mode. Press and

hold the skip forward button for at least 1 second

to seek forward to the first station with a strong

signal. However the seek will miss many of the

weaker stations. Repeatedly press the Tune or

Skip button to find the most stations.

7

Select(33): With the system in either CD Player

or AM/FM radio mode, repeatedly press the 

select button to choose mode of volume, bass,

treble, or balance. Then use the volume up or 

volume down button to increase or decrease 

the level of selected mode.

8

Volume Up(31) and Volume Down(35)

Use the select button to choose volume, bass,

treble, or speaker balance. Then use the volume

up / volume down button to control level of each

selected mode.

9

CD +(42) : In CD Player mode, press to move 

up to the next disc.

10 

CD -(41): In CD Player mode, press to move 

back to the previous disc.

11

REPEAT(43): In CD Player mode, press to 

repeat the currently playing track. Press again

to cancel action.

12

SCAN(36): In CD Player mode, press the scan

button to hear at least the first 10 seconds of 

  

each track. Press again to cancel action.

Basic Operation

1

You may use the remote to save your favorite

stations to memory so you can quickly return to

them at a later time. You will notice the buttons

on the lower part of the control are numbered 

1 through 6. The Memory function lets you save

up to 6 of your favorite stations in each "band"

mode. A total of 30 stations can be stored in the

memory.

Use the MODE button(30) to select radio 

mode.Then press BAND(32) to select one of 

the available bands. For this example we will 

choose FM 1.

2

Next, use the skip forward(45) or skip back 

(34) button to scan through the stations and 

choose your first one to save. When you have 

selected a station, press number 1 on the remote

and hold it for at least 2 seconds. You will hear

a "beep" when you press. Continue to hold and

in about 2 seconds you will hear a second beep.

This confirms that your station has been saved.

Now, if you will notice in the LCD display you 

will see that you are in section FM 1, your 

selected station frequency is displayed in the 

center and on the right side of the LCD your first

saved selection is shown as CH 1. To add a 

second preset station, use the skip forward(45)

or skip back(34) button to locate the next station

you want to save, then press and hold button 

number 2 on the remote keypad.You may add 

up to 6 stations in the FM 1 section. To save 

more stations, repeatedly press the BAND button

(32)to advance to FM 2, FM 3, AM 1 etc. and 

repeat the above steps to locate and save more

stations. You may save up to 6 stations in 

each "band".

3

To locate your saved stations: Select the band

by pressing MODE button(10/30) to toggle 

between CD Player / Radio. Press BAND 

button(32) to scroll through band selections

FM 1 through AM 2. If you have stations saved

at the FM 1 display, use button numbers 1 

through 6 to find stored channels in  that 

section. Press BAND(32) to move to FM 2, 

then use buttons 1 through 6 to scroll through 

the saved channels in the FM 2 location. Repeat

for each additional band mode.