Sony ACY-RKSL Manual De Usuario

Preparation

12

Mount the brackets and rail assemblies on the rack.

Mount the brackets that hold the rail assemblies in place 
on the rack.

Decide where the brackets are to be mounted.
The library position in relation to the bracket 
position is explained below.
We recommend using a marker to mark the position 
where each bracket is to be mounted.

Note that if the four brackets are not mounted at the 
correct height, it will be impossible to mount the 
library.

Using the bracket positioning and B screws, mount 
the two front brackets on the rack.
1 Insert a bracket positioning screw into the second 

screw hole from the top of the bracket and tighten 
it slightly.

2 Insert a B screw into the second screw hole from 

the bottom of the bracket and tighten it slightly. 
Align the screws with the center of the rack screw 
holes, and then tighten the screws completely, 
securing the bracket to the rack.

Use the bracket positioning screws only with the 
upper part of the screw holes on the front brackets.

Using the B screws and rack mounting spacers, 
mount the two rear brackets on the rack.
First align the rack mounting spacers with the upper 
part of the rack screw holes, then center the B 
screws on the rack screw holes, and finally secure 
the brackets to the rack.
Make sure that all four brackets are facing the 
correct way and are mounted at the correct height.

Only use the spacers with the upper screws on the 
rear brackets. (The spacers are only used with the 
rear brackets.)

1U

2U

2U

B screw

Bracket

Bracket positioning 
screw

Position 
of screw 
cramps

Bracket

Make sure that the bracket screw 
holes are centered horizontally.

Center the 
screw holes

Bracket positioning screw

2U

Rack mounting 
spacer

B screw

B screw