Creative 0404 Manual De Usuario
4 - The PatchMix DSP Mixer
The Session
E-MU Digital Audio System
17
I/O Settings
The 0404 PCI card is optimized for signal levels of -10dBV (consumer standard) for the
analog inputs and outputs. -10dBV levels are compatible with most consumer audio
gear.
analog inputs and outputs. -10dBV levels are compatible with most consumer audio
gear.
Setting correct input and output levels is important! You can measure the level of an
input by inserting a meter into the first effect location in the strip. Adjust your external
equipment outputs for the optimum signal level. See
input by inserting a meter into the first effect location in the strip. Adjust your external
equipment outputs for the optimum signal level. See
for details.
The optical digital TOSLINK input and output on the Digital Breakout Cable can be
used to transmit and receive stereo S/PDIF.
used to transmit and receive stereo S/PDIF.
• PCI Card S/PDIF Input
Selects between coaxial or optical S/PDIF input. S/PDIF
out is always transmitted on both the coaxial and
optical outputs.
out is always transmitted on both the coaxial and
optical outputs.
• S/PDIF Output Format
Selects between S/PDIF or AES/EBU format for S/PDIF.
This sets the S/PDIF-AES status bit, but does not affect
the signal level.
This sets the S/PDIF-AES status bit, but does not affect
the signal level.
E-MU 0404
Optical Input
Select
S/PDIF
Output
Format Select
(Sets S/PDIF-AES
status bit, but
doesn’t affect
level.)
Output
Format Select
(Sets S/PDIF-AES
status bit, but
doesn’t affect
level.)