Jensen BT1613 Manual De Usuario

BT1613

5

store it in the supplied carrying case to protect it 
from dirt and damage.

To re-attach the front panel, make sure the 
electrical terminals on the back of the panel are 
free of dust and dirt, as debris could cause 
intermittent operation or other malfunctions. 
Position the right side of the panel in place so 
that it is correctly engaged, and then lightly 
press the left side of the panel until the panel 
locks into place.

The reset button (26) is located on the front of 
the chassis and can only be accessed with the 
front panel removed. The reset circuitry 
protects the microprocessor circuitry. Since 
resetting the unit will erase the time and preset 
memories, it should only be activated upon 

initial installation after all wiring is complete, or 
if there is a malfunction of any of the switches 
on the unit. In these circumstances, pressing 
the reset button will clear the system and return 
the unit to normal operation. 

RESET