3com FlexWATCH 3110 Manual De Usuario

Network Video Server                                                        User’s Manual 

 

 

Seyeon Tech Co., Ltd 

 
 

48

 
 

) 

- 

If you do not connect FlexWATCH

TM

 server to NDVR server, do not set TX module 

configuration 

- 

Once Tx Module configuration is done, set up RX module configuration in the 
NDVR server as well 

 
Video proxy function is supported by NDVR server such as FW-5440 and FW-5000 server. 
By registering FlexWATCH

TM

 video server into NDVR server, live video  can be recorded in 

the NDVR server and live view can be accessed through NDVR server web page which 
means user does not need to separately run web browser to view respective cameras 
from  FlexWATCH

TM

 video servers. 

 
TX module registration is to set up the FlexWATCH

TM

 server to communicate with FW-

5440 or FW-5000 NDVR server or FW-VSS Proxy Server only. When TX module is enabled 
at the FlexWATCH

TM

 server, RX module at NDVR server side should also be enabled as 

well. 
 
Two different modes are provided as a connection type. One is Passive and the other is  
Active mode. Depending on which device tries to establish the connection to the other 
party, the connection type will be decided. 

Passive mode : NDVR server tries to establish connection to FlexWATCH

TM

 server 

Active Mode : FlexWATCH

TM

 server tries to establish connection to NDVR server 

Once connection type is decided in the FlexWATCH

TM

 server, the connection type in the 

NDVR server should be opposite so that it can communicate with FlexWATCH

TM

 server. 

For example, once Passive mode is set up in the FlexWATCH

TM

 server, Active mode must 

be set in the NDVR server. 
 

- INTPLUS [2005] -