Cisco Systems 2900 Manual De Usuario

Pull the wiring into the back box through the conduit fitting.

Connect all required wiring (see the 

).

Install the back box by compressing the spring clips and pushing the back box through the hole.

Tighten the screws until you hear a clicking noise.

Install the mount for the pendant dome.

See the instructions supplied with the mount.

If the mount is outdoors, make sure it is properly sealed to keep moisture out.

Open the hinged door to the back box by pushing the tab lock towards the wall of the unit and lifting the 
door open.

Pull the wiring into the back box.

Connect all required wiring (see the 

).

Screw the back box onto the mount (see 

).

If outdoors, apply thread compound (supplied) to the threads on the back box.

Thread compound must be applied. Not doing so may prevent the units from being separated in 
the future.