Craftsman 486.24316 Manual De Usuario

4

•  Fasten the hitch mount arms to the outside of the front

angle brackets. Use two 5/16" x 1" hex bolts and 5/16"
nylock nuts.

Tighten, then loosen the nuts slightly. 

See figure 2.

•  Fasten the hitch mount arms to the outside of the rear

hitch arm mount brackets. Use two 5/16" x 1" carriage
bolts and 5/16" nylock nuts.

Do not tighten yet. See 

figure 2.

•  Remove all parts and hardware packages from the

carton. Lay out all parts and hardware and identify
using the illustrations on pages 3 and 4.

(2) 1/2" wrenches
(1) 9/16" wrench
(1) 3/4" wrench or adjustable wrench
(1) Pliers

1.  Hitch Mount Arms (2)
2.  Lift Handle
3.  Hitch Brackets (2)
4.  Axle Bracket
5.  Hitch Arm Mount Brackets (3)
6.  Wheels (2)
7.  Tine Shield Assembly

•  Assemble two (tall) hitch arm mount brackets and two

(short) angle brackets to the bottom of the tine shield
at the rear. Use four 5/16" x 1" hex bolts and 5/16"
nylock nuts.

Do not tighten yet. Position the brackets

as shown in figure 1.

•  Assemble two angle brackets to the bottom of the tine

shield at the front. Use two 5/16" x 1" hex bolts and
5/16" nylock nuts.

Do not tighten yet. Position the

brackets as shown in figure 1.