Dimension One Spas Bay Collection Manual De Usuario
2004 Bay Collection
Owner’s Manual
Electrical System
Symptom
Problem
Corrective Action
Will not turn on
– in any mode
– in any mode
No power
Check circuit breaker and/or GFCI
Turns on by itself
Normal automatic daily
power filtration, or anti-
freeze cycle
power filtration, or anti-
freeze cycle
No action required
Light is out
Burned out bulb
Replace bulb
1. Automatic
timer
has shut pump off
1.
Push JETS pad again to start another cycle
Pump shuts
down
unexpectedly
while in use
down
unexpectedly
while in use
2. Motor
over-heated
and automatic
protective device
has shut down
pump(s)
protective device
has shut down
pump(s)
2.
If pump(s) will not restart when JETS pad is pushed, call for service
Make sure that the equipment panel vent area is not blocked. Vent blockage
can cause serious damage to your equipment.
Make sure that the equipment panel vent area is not blocked. Vent blockage
can cause serious damage to your equipment.
1.
Check water level
2. Clean
filter
If problem persists:
1.
Turn off power
2. Restart
the
system
If problem persists:
3 flashing LEDs
appear on the
Top Side Control
appear on the
Top Side Control
Possible sensor errors
Call for service
Spa lights always
start in the
default light
sequence
start in the
default light
sequence
Whenever the lights are
turned off they always
turn on in Color Fade
Fast mode
turned off they always
turn on in Color Fade
Fast mode
Because both lights are synchronized together, they always return to a “common
starting point” after they have been turned off for more than five seconds. This
ensures that they will remain synchronized.
starting point” after they have been turned off for more than five seconds. This
ensures that they will remain synchronized.
63