Dynasty Spas Premier System D-2000 Manual De Usuario

PROTECT YOUR COVER

Proper Maintenance For Your Dynasty Spa Cover

2) Splash cool tap water on the hardware to free them if they become frozen

     shut. WD-40 will keep the lock free, but apply carefully because it can

     damage the cabinet finish.

3) We recommend a good treatment with Vinyl Conditioner before your first

     snow or ice. If possible, treat during the winter too.

4) Monitor your water chemistry. Even it the spa is not used regularly, improper

     water chemistry can cause a mildew build-up on the cover. Clean water and PH

     controlled water will prolong the life of the cover.

5) If mildew is found, remove foam cores from the vinyl encasement. Mix water,

     a teaspoon of mild dish washing soap and a cup of bleach. With a soft bristle

     brush, scrub the inside and outside of the vinyl encasement thoroughly. Then

     take a washcloth and wipe down each foam core, rinse thoroughly. Place

     the encasement in the sun and foam cores in the shade to dry. Once

     everything is thoroughly dry, spray the cores and encasement with a

     mildew inhibitor (like Pine Sol). Allow to dry completely, then reassemble.

     The key here of course is to maintain proper water chemistry to avoid mildew.

6) We suggest rotating the cover every six months to maintain even wear.

     Unzip the cover, remove the foam cores, turn over and reassemble. 

1) Use a soft broom to remove accumulation after every snowfall or ice storm