Jacuzzi HE97000 Manual De Usuario

Comfort Whirlpool Bath

Installation and Operation 

www.jacuzzi.com

 

Page 17

Fill to at least 1˝ to 2˝ 

above highest jet

All bathtubs manufactured by Jacuzzi Luxury Bath are 

designed for “fill and drain,” which means the bathtub 

should be drained after each use and filled with fresh 

water by the next bather. This is a health precaution, 

as these bathtubs are not designed to hold water 

continuously like pools or spas. 
Close the drain and fill the bathtub until water is at 

least 1˝ to 2˝ (25mm to 51mm) above the highest jet 

(see water line indicated in the illustration). Do not turn 

on the whirlpool system at any time if the jets are not 

completely immersed in water. Running the whirlpool 

system when there is insufficient water in the bathtub 

could result in water spraying outside the bath area. 

Running the whirlpool system without water will damage 

the recirculating pump.

  When exiting the bathtub, the water level will drop 

below the jets which could result in water being 

sprayed out of the unit. To prevent this, you must 

turn unit OFF before exiting bathtub.

 

G