Jacuzzi J - 210 Manual De Usuario

Never leave your hot tub unattended for any reason while the 

cover is open and accessible, especially to small children and 

animals!

Never add chlorine tablets (trichlor) or acid to your hot tub for 

any reason! These chemical may damage components within 

your hot tub, burn or irritate your skin, create a rash and void 

the manufacturer warranty for your spa.

!

If you have elected to have your spa equipped with the optional Jacuzzi 

CD ozone water purification system you will find that your water stays 

fresh and clear with significantly less chemical sanitizer usage. You will 
also probably be able to go longer between complete spa drainings. 

Your spa has a self-diagnostic control system. The system will 

automatically display the following if a problem is detected.

When the actual spa water temperature reaches up to 

2°F (1°C) above the set temperature, the spa goes into 

“summer logic.” The 24-hour circulation pump will turn off 

automatically to avoid adding additional heat to the water, eventually 

creating an overheat condition. This setting is not user-programmable.

note: The summer logic does not take effect until the spa water 

temperature reaches 95°F (35°C). This condition is more likely in 

excessively hot weather. Remember, the spa’s ability to cool is directly 

affected by the ambient temperature. An excessively hot ambient 

temperature may prevent the spa from cooling down because it’s 

fully insulated construction is designed to retain heat and to minimize 

operating costs.

Cool Condition - Temperature has dropped 20°F (11°C)  

below the current set temperature. Jets pump 1, (or 

optional circulation pump) and the heater have been activated to bring 

the temperature to within 15°F (8°C) of the set temperature. No 

corrective action is required! 

note: This condition is common during first time fill ups or during refills 

since tap water is often very cold.