Black Box MPSH16-D20-120V Manual De Usuario

 

15.  Saving and Restoring  
Configuration Parameters

Once the Outlet Managed PDU is properly configured, parameters can be 

downloaded and saved as an ASCII text file.  Later, if the configuration is 

accidentally altered, the saved parameters can be uploaded to automatically 

reconfigure the unit without the need to manually assign each parameter.

Saved parameters can also be uploaded to other Outlet Managed PDUs, allowing 

rapid set-up when several identical units will be configured with the same 

parameters.

The "Save Parameters" procedure can be performed from any terminal emulation 

program that allows downloading of ASCII files (e.g. HyperTerminal™,  

TeraTerm©, etc.).

Note:

15.1.  Sending Parameters to a File

1.  Start your terminal emulation program and access the Text Interface 

command mode using an account that permits Administrator level commands.

2.  When the command prompt appears, type 

/U and press [Enter].  The 

Outlet Managed PDU will prompt you to configure your terminal emulation 

program to receive an ASCII download.

a)  Set your terminal emulation program to receive an ASCII download, and 

the specify a name for a file that will receive the saved parameters  

(e.g. psv_parameters.PAR).

b)  Disable the Line Wrap function for your terminal emulation program.  

This will prevent command lines from being broken in two during 

transmission.