Black Box MPSH16-D20-120V Manual De Usuario

 

•  Power Up Default:   Determines how this plug will react when the Default 

command (/D) is invoked, or after power to the unit has been interrupted and 

then restored.  After the default command is invoked, or power is restored, 

the Outlet Managed PDU will automatically switch each plug On or Off as 

specified by the Power-Up Default.  (Default = On).

Note:

•  Boot Priority:  The Boot Priority parameter determines the order in which 

plugs will be switched On.  The Plug that has been assigned a Boot Priority of 

"1" will always be switched on first, followed by the plug that has been assigned 

the Boot Priority of "2", and so forth.  For more information on the Boot 

Priority parameter, please refer to Section 5.7.1.  (Default = All plugs prioritized 

according to Plug Number.)

5.7.1.  The Boot Priority Parameter
Normally, when an "On" or "Reboot" command is invoked, the Outlet Managed PDU 

will switch on its plugs in their default, numeric order.  Although in many cases, 

the default, numeric order will work fine, there are other cases where an individual 

device (such as a router) must be switched on first, in order to support a second 

device that will be switched on later.

The Boot Priority Parameter simplifies the process of setting the order in which 

plugs are switched On, by assigning a priority number to each plug, rather than 

by requiring the user to make certain that devices are always connected to the 

Outlet Managed PDU in a set order.  Likewise, when new devices are added to 

your equipment rack, the Boot Priority Parameter eliminates the need to unplug all 

existing devices and then rearrange the plugs connected to the Outlet Managed PDU 

(and re-define plug parameters) to ensure that they are switched on in the  

desired order.