Siemens 9300 Manual De Usuario
9300 Series User’s Guide
Nameplate Info Menu
Chapter 2 - Using The Front Panel
Page 35
Nameplate Info Menu
Select N
AMEPLATE
I
NFO
to display information about the various options of the
device, such as:
Security Menu
When any changes are made to the meter via the front panel, the meter prompts
for a user password. The password prevents unauthorized tampering with your
meter’s configuration. Depending on site security, you may want to modify the
user password from the default to protect your configuration. The default
password is 00000 and can be set to a maximum numeric value of 60000.
for a user password. The password prevents unauthorized tampering with your
meter’s configuration. Depending on site security, you may want to modify the
user password from the default to protect your configuration. The default
password is 00000 and can be set to a maximum numeric value of 60000.
Changing the User Password
1. Select S
1. Select S
ECURITY
from the Setup menu.
2.
You will see that the screen displays 00000. Enter the current password. If you
have not previously changed your password, the default is 00000.
have not previously changed your password, the default is 00000.
3.
Choose M
ODIFY
P
ASSWORD
to alter your password (the F
ACTORY
U
SE
O
NLY
option is for factory purposes and is not accessible).
4.
Enter your new numeric password.
5.
Select Y
ES
to accept your new password. You will be returned to the Setup menu.
Diagnostic Menu
The D
IAGNOSTIC
menu is accessed from the Setup menu; you can view per-phase
voltage and current harmonics screens, verify communications, verify the digital
I/O, and check the meter’s local time.
I/O, and check the meter’s local time.
manufacturer
meter type and class
service type
voltage and current input ratings
auxiliary power
operating frequency
transformer ratios
meter firmware revision
digital output information
approvals
serial number
accuracy rating
acceptable operating temperature
battery life
configured demand settings
three custom text lines written into
the meter’s Factory module
the meter’s Factory module