Craftsman 137.21241 Manual De Usuario

ACCESSORIES AND ATTACHMENTS

TOOLS NEEDED FOR ASSEMBLY

RECOMMENDED ACCESSORIES

●

Use only accessories recommended for

this miter saw. Follow instructions that

accompany accessories. Use of improper

accessories may cause hazards.

●

The use of any cutting tool except 10 in.

saw blades which meet the requirements

under recommended accessories is

prohibited. Do not use accessories such

as shaper cutters or dado sets. Ferrous

metal cutting and the use of abrasive

wheels is prohibited.

●

Do not attempt to modify this tool or

create accessories not recommended for

use with this tool. Any such alteration or

modiﬁcation is misuse and could result in

a hazardous condition leading to possible

serious injury.

ACCESSORIES

Visit your Sears Hardware Department or see the
Sears Power and Hand Tool Catalog to purchase
recommended accessories for this power tool.

●

To avoid the risk of personal injury, do not

modify this power tool or use accessories

not recommended by Sears.

●

Read warnings and conditions on your

CARBIDE TIPPED SAW BLADE. Do not

operate the saw without the proper saw

blade guard in place. Carbide is a very

hard but brittle material. Care should be

taken while mounting, using, and storing

carbide tipped blades to prevent accidental

damage. Slight shocks, such as striking

the tip while handling, can seriously

damage the blade. Foreign objects in the

workpiece, such as wire or nails, can also

cause tips to crack or break off. Before

using, always visually examine the blade

and tips for bent blade, cracks, breakage,

missing or loose tips, or other damage. Do

not use if damage is suspected. Failure to

heed safety instructions and warnings can

result in serious bodily injury.

COMBINATION SQUARE MUST BE TRUE

Should not gap or overlap when square is ﬂipped

over (see dotted ﬁgure).

WARNING

SUPPLIED

NOT SUPPLIED

Adjustable Wrench

Combination Square

Philips Screwdriver

Slotted Screwdriver

Blade Wrench

Draw light line on

board along this

edge.

Straight edge or

a 3/4 in. board,

this edge must be

perfectly straight.

Gap from untrue square when

ﬂipped over.

Hex Key