Craftsman 919.724271 Manual De Usuario
3- ENG
D25050
SPECIFICATION CHART
Model No.
919-724270
Max. Developed HP
7
Bore
2.375
Stroke-High Pressure
.54”
Low Pressure
1.45”
Voltage-Single Phase
240
Minimum Branch Circuit Requirement
15 amps
Fuse Type
Time Delay
Air Tank Capacity - Gallons
60
Approximate Cut-in Pressure
145
Approximate Cut-out Pressure
175
SCFM@ 40 psig
9.6
SCFM@ 90 psig
9.0
SAFETY GUIDELINES - DEFINITIONS
Indicates an
imminently hazardous
imminently hazardous
situation which, if not avoided, will
result in death or serious injury.
result in death or serious injury.
Indicates a potentially
hazardous situation
hazardous situation
which, if not avoided, could result in
death or serious injury.
death or serious injury.
Indicates a potentially
hazardous situation
hazardous situation
which, if not avoided, may result in
minor or moderate injury.
minor or moderate injury.
Used without the
safety alert symbol
safety alert symbol
indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
situation which, if not avoided, may
result in property damage.
This manual contains information that is important for you to know and understand. This information
relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you
recognize this information, we use the symbols below. Please read the manual and pay attention to
these sections.
relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you
recognize this information, we use the symbols below. Please read the manual and pay attention to
these sections.
IMPORTANT SAFETY INSTRUCTIONS
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known (to the State of California) to
construction activities contains chemicals known (to the State of California) to
cause cancer, birth defects or other reproductive harm. Some example of these chemicals are:
G
lead from lead-based paints
G
crystalline silica from bricks and cement and other masonry products
G
arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, always wear MSHA/NIOSH approved, properly fitting face mask or respirator when using
such tools.
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, always wear MSHA/NIOSH approved, properly fitting face mask or respirator when using
such tools.
When using air tools, basic safety precautions should always be followed to reduce the risk of of
personal injury.
personal injury.
SAVE THESE INSTRUCTIONS
IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN
SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL
WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT.
SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL
WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT.