Black & Decker KC4815 Manual De Usuario

c.  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power 

tools. Such preventive safety measures reduce the risk 

of starting the power tool accidentally.

d.  Store idle power tools out of the reach of children and do 

not allow persons unfamiliar with the power tool or these 

instructions to operate the power tool. Power tools are 

dangerous in the hands of untrained users.

e.  Maintain power tools. Check for misalignment or binding 

of moving parts, breakage of parts and any other 

condition that may affect the power tools operation. If 

damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 

tools.

f.  Keep cutting tools sharp and clean. Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control. g. Use the power tool, 

accessories and tool bits etc., in accordance with these 

instructions, taking into account the working conditions 

and the work to be performed. Use of the power tool for 

operations different from those intended could result in a 

hazardous situation.

a.  Recharge only with the charger specified by the 

manufacturer. A charger that is suitable for one type of 

battery pack may create a risk of fire when used with 

another battery pack.

b.  Use power tools only with specifically designated battery 

packs. Use of any other battery packs may create a risk 

of injury and fire.

c.  When battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, screws, 

or other small metal objects, that can make a connection 

from one terminal to another. Shorting the battery 

terminals together may cause burns or a fire.

d.  Under abusive conditions, liquid may be ejected from the 

battery; avoid contact. If contact accidentally occurs, 

flush with water. If liquid contacts eyes, additionally seek 

medical help. Liquid ejected from the battery may cause 

irritation or burns.

a.  Have your power tool serviced by a qualified repair 

person using only identical replacement parts. This will 

ensure that the safety of the power tool is maintained.

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the fastener may contact 

hidden wiring. Fasteners contacting a "live" wire may 

make exposed metal parts of the powertool "live" and 

could give the operator an electric shock.

•  Use clamps or another practical way to secure and 

support the workpiece to a stable platform. Holding the 

work by hand or against your body leaves it unstable and 

may lead to loss of control.

•  This tool is not intended for use by persons (including 

children) with reduced physical, sensory or mental 

capa-bilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction 

concerning use of the appliance by a person responsible 

for their safety. Children should be supervised to ensure 

that they do not play with the appliance.

•  The intended use is described in this instruction manual. 

The use of any accessory or attachment or performance 

of any operation with this tool other than those 

recom-mended in this instruction manual may present a 

risk of personal injury and/or damage to property.

Only plug the Battery Charger in 230V mains. Recharge the 

Battery only with the provided charger. Before starting any 

work on walls, floors or similar, make sure that all power lines 

in the work area are switched off at the main switchboard. 

Inspect the proposed drill hole location for any utility lines 

(e.g. water, gas, power) before drilling. Use a suitable device 

such as a metal or electricity line detecting device. If in doubt 

contact a qualified electrician or your utility provider. Both 

tools and work-pieces can heat up considerably during the 

drilling operation. Allow a sufficient period of cooling before 

handling. Wear appropriate gloves.

Warning! Impact wrenches are not torque 

wrenches. Do not use this tool for tightening 

fasteners to specified torques. An independent, 

calibrated torque measurement device such as a torque 

wrench should be used when under tightened or over 

tightened fasteners can lead to the failure of the joint.

Important! Danger! There are 4 pcs 1.2V Ni-cd battery in 

screwdriver,Never short-circuit the battery or expose it to 

moisture.Do not store it together with any metal parts which 

could short-circuit the contacts.the machine could 

overheat,start burning or explode.