Cisco Systems 2130 Manual De Usuario

Lift the air duct straight up and remove it from the appliance chassis. (See location 5 in 

.)

The processor air duct is required for proper airflow within the chassis. Be sure the air duct is in place 
again before installing the appliance cover. 

To install the processor air duct:

Review the information in the 

 and the 

.

Power down the appliance and all external devices. Disconnect the AC power cord or DC power source 
and all external cables.

Remove the appliance cover. For instructions, see the 

Slide the duct forward until it is flush with the front of the appliance and stops.

The front edge will engage at the front panel. (See location 3 in 

.) The metal tab 

at the rear will engage. (See location 4 in 

.)

Push the air duct down into the appliance chassis.

Tighten the captive fastener. (See location 1 in 

This section contains the following topics:

The memory is not hot-swappable. Before removing or replacing any dual in-line memory module 
(DIMM), you must first take the Cisco ADE 2130 and 2140 Series appliance out of service, turn off the 
appliance by pressing the power button, and unplug the AC power cord from the appliance or wall outlet 
or disconnect the DC power source.

When you handle static-sensitive devices, take precautions to avoid damage from static electricity. For 
more information on handling these devices, see the 

.