Compaq 1210 Manual De Usuario

- 8 -

          X: Available

*Moire is a series of wavy patterns caused by the interference between the aperture grille

  of the CRT and the raster generated by the video card. Adjust the level to the minimum

 value at which moire is no longer observed.

A. Press "GEOMETRY RESET" to restore to the factory preset level.
B. Press          and         buttons together, to restore to the factory preset level.
C. Set data does not change by the change of the signal timing.

  Adjusts the contrast level.

  X    X

  Adjusts the black level of the screen.

  X   X

COLOR TEMPERATURE   Adjusts the color temperature of the image on the screen.

  X   X

  Adjusts the horizontal size of the image on the screen.

X

  Adjusts the horizontal position of the image on the screen.

X

  Adjusts the vertical size of the image on the screen.

X

  Adjusts the vertical position of the image on the screen.

X

  Straightens the left and right sides of the image on the screen.

X

  Adjusts the parallelism of the left and right sides of the image on the screen.

X

  Adjusts the pincushioning at the top corners of the screen.

X

  Adjusts the pincushioning at the bottom corners of the screen.

X

  Adjusts the curvature of the left and right sides of the screen image.

X

  Adjusts the vertical slant or tilt of the screen image.

X

  Adjusts the rotation of the image.

  X

  Restore to the factory preset level. (Only function on factory preset timing)

-

-

-

*MOIRE CANCEL LEVEL   Adjusts the moire level on the screen.

  X

  Use this function to eliminate excessive green or white background that
  may occur when external sync signals are applied to the monitor.

  Selects video level 1.0V or 0.7V. (0.7V Standard)

  Eliminates possible color shading or impurity.

-

-

-

  When setting to ON, the power consumption of the monitor will be reduced

  X

  when not in use.

  Locks the OSD function to keep the screen you desired.

  X

  Indicates the current scanning frequency and factory or user preset

                                                      timing number.

-

-

-

  Selects the language used on OSD screen.

  X