Siemens MCM 1755 NTD Manual De Usuario
Color monitor MCM 1755 NTD
A26361-K472-Z100-2-5E19
English - 3
Important notes
In this chapter you will find information regarding safety which is essential to take
note of with your monitor. The chapter also contains information on the licenses
issued for your equipment.
note of with your monitor. The chapter also contains information on the licenses
issued for your equipment.
Safety
This device complies with the relevant safety regulations for data processing
equipment, including electronic office machines for use in an office environment. If
you have any questions, contact your sales office or our customer service.
equipment, including electronic office machines for use in an office environment. If
you have any questions, contact your sales office or our customer service.
•
Transport the device only in its original packaging or another corresponding
packaging to protect it from knocks and jolts.
packaging to protect it from knocks and jolts.
•
If the device is brought into the installation site from a cold environment,
condensation can form. Before operating the device, wait until it is absolutely
dry and has reached approximately the same temperature as the installation
site.
condensation can form. Before operating the device, wait until it is absolutely
dry and has reached approximately the same temperature as the installation
site.
•
During installation and before operating the device, observe the instructions
on environmental conditions in the chapter "
on environmental conditions in the chapter "
" and the chapter
".
•
To ensure adequate ventilation the monitor may only be operated with the
monitor foot installed.
monitor foot installed.
•
The color monitor must not be exposed to strong magnetic fields (e. g. caused
by magnetic paper clip holders or loudspeakers). Strong magnetic fields could
result in a permanent blotchy image.
by magnetic paper clip holders or loudspeakers). Strong magnetic fields could
result in a permanent blotchy image.
•
The device automatically sets itself to the correct voltage within the range from
100 V to 240 V. Ensure that the local line voltage is within this range.
100 V to 240 V. Ensure that the local line voltage is within this range.
•
The device must be installed in such a way that the user has good access to
the appliance socket.
the appliance socket.
•
The power switch does not disconnect the device from the line voltage. To
disconnect the device from the line voltage, you must pull out the power plug.
disconnect the device from the line voltage, you must pull out the power plug.
•
Lay all cables so that nobody can stand on them or trip over them. When
attaching the device, observe the relevant notes in the chapter "
attaching the device, observe the relevant notes in the chapter "
the monitor
".