Navigon 8410 EU Truck B09021021 Manual De Usuario

User’s manual NAVIGON 8410 

- 46 - 

Navigation 

3.  Enter the starting point. (Refer to the corresponding section of the 

chapter "Specifying a destination" on page 29). 

4.  Tap on Set Starting Point. 

The selected starting point will now be displayed next to the 0 
button (Starting Point). 

► 

Tap on the starting point (button 0). 

The S

 menu opens. You can now enter a different 

starting point. Proceed as described above. 

The route points of a route are the destinations that you want to 
navigate to. 
The flow number for each route point is indicated on a button in front of 
it. 
1.  Tap on the Add Route Point box. 

The R

 menu opens. 

2.  Tap on the button for how you want to enter the destination. 
3.  Enter the route point. (Refer to the corresponding section of the 

chapter "Specifying a destination" on page 29). 

4.  Tap on Add. 

The selected route point is now shown next to its flow number. 

Repeat these steps for each destination that you want to add to your 
route. 

Route points can be deleted from a route. The order of the route points 
can be changed as you wish. 

 

 The starting point (flow number "0") can be neither moved nor 

deleted. However you can make another route point into the starting 
point provided the Current Position setting was not selected for the 
starting point. 

 

► 

Tap on the route point that you want to edit. 

The context menu contains the following buttons: 

 Route Point Up: Moves the selected route point further to the front. 

(Example: route point 2 becomes route point 1) 

 Route Point Down: Moves the selected route point further to the back. 

(Example: route point 2 becomes route point 3)