Macally PHR-100SU Manual De Usuario
Q3. How is SATA compared to USB and Firewire in speed? What per-
formance gain can one expect by using SATA connection?
formance gain can one expect by using SATA connection?
A3: Following chart shows the specification data rate(MBps) and Overhead
among USB, Firewire and SATA.
among USB, Firewire and SATA.
Next table compares real world benchmark between USB, Firewire and
SATA drives:
SATA drives:
Above data are quoted from www.sata-io.org. The performance of PHR-
100SU in your application might be higher or lower depending upon the hard
drive used, SATA and USB host and computer hardware. In our test, we
have seen over 60MB/s sequential read and write speed in SATA connec-
tion. SATA is the better choice for storage device.
100SU in your application might be higher or lower depending upon the hard
drive used, SATA and USB host and computer hardware. In our test, we
have seen over 60MB/s sequential read and write speed in SATA connec-
tion. SATA is the better choice for storage device.
USB
1394
Serial
Raw Interface
speed
480Mbps
400Mbps
1500Mbps
Benchmark
comparison
64K read
31.6MB/sec
34.8MB/sec
42.4MB/sec
Benchmark
comparison
64K write
26.5MB/sec
26.7MB/sec
56.2MB/sec
Burst
Transfer
Rate
Table: Comparison of interface speeds and data transfer
rates external disk drive interfaces
rates external disk drive interfaces
33.5MB/sec
36.2MB/sec
111.3MB/sec
19