Cisco Systems OL-7822-06 Manual De Usuario

Specify the On-failure link behavior.

To specify Bypass , press press Enter.

To specify Cutoff , type 

2 

and press press Enter.

Enter On-failure behavior:

1- bypass

2- cutoff

Enter your choice [1]:

Specify the admin status of the SCE 1000 after abnormal boot.

To specify Not-Operational status after abnormal boot, press press Enter.

To specify Operational status after abnormal boot, type 

1 

and press press Enter.

Enter admin status of the SCe after abnormal boot:

1- Operational

2- Not-Operational

Enter your choice [1]:

The following examples present the procedure for configuring the topology-related parameters for 
various topologies. Refer the  for a summary of appropriate values for the parameters for each topology.

Following is a sample topology configuration for a topology using an external switch.

All other parameter values are automatically assigned by the system as follows:

Link bypass mode on-failure — Bypass

Admin status of the SCE after abnormal boot — Operational

Would you like to enter the Topology configuration menu? [no]: y

Enter Connection mode:

1- inline

2- receive-only

Enter your choice [1]: 2

Following is a sample topology configuration for a non-redundant bump-in-the-wire (inline) topology. 
All values are the system default values, so it is not necessary to type in the response. Simply press enter 
at each line.

Connection mode — Inline

For a non-redundant topology, link bypass on-failure should be Bypass, so that traffic continues to 
flow through the link.

After operation of the system resumes, and the SCE 1000 reboots, the SCE 1000 will resume 
operation. (Admin status after abnormal reboot is Operational.)

Would you like to enter the Topology configuration menu? [no]: y

Enter Connection mode:

1- inline