Creative Dxr2 Manual De Usuario

Step 2:  Insert the 
Dxr2 Decoder 
Card

The Dxr2 decoder card fits a PCI expansion slot.

1.

Turn off the power to your computer and any connected devices.  Disconnect the power cord 
from the electrical source.

2.

Touch a metal surface on the computer to ground 
yourself and discharge any static electricity.

3.

Remove the cover from the computer.

4.

Locate a free PCI expansion slot for the Dxr2 
decoder card.  The relative length and position of the 
PCI expansion slots are shown in the figure to the 
right.

5.

Remove the metal plate from the expansion slot.

6.

Align the Dxr2 decoder card with the PCI slot and 
press it into the slot as shown.  The card must sit firmly 
inside the PCI slot.

7.

Secure the Dxr2 decoder card in the slot by replacing the 
screw removed with the slot cover.

8.

Proceed to “Step 3: Install the Drive in Your Computer.”

PCI slot

ISA slot

VL slot

Note:  Refer to 
your computer’s 
manual for help in 
locating a slot.

B. Fasten the card to 

the slot with a screw.

A. Press the Dxr2 

decoder card 
into the slot.

PCI slot

Do not force the Dxr2 decoder 
card into the slot.  If it does not fit 
properly, remove it and try again.

Use slot one or the available slot 
having the highest priority in 
your computer for best 
performance and compatibility.  
See your computer’s manual for 
information on expansion slots 
and their priorities.

Dvd-fm.book  Page 6  Thursday, December 17, 1998  9:44 AM