Xerox 701P44973 Manual De Usuario

Product Recycling and Disposal

1

If you are managine the disposal of your Xerox product, please note that the product 

contains lead, mercury, and other materials whose disposal may be regulate due to 

environmental considerations in certain countries or states.  The presence of lead and 

mercury is fully consistent with global regulations applicable at the time that the 

product was placed on the market.
A full declaration of the conformity, defining the relevant directives and referenced 

standards, can be obtained from your Authorized Local Dealer.

Application of this symbol on your equipment is confirmation that you must dispose of 

this equipment in compliance with agreed national procedures.
In accordance with European legislation, end of life electrical and electronic 

equipment subjec to disposal must be managed with agreed procedures.
Prior to disposal, please contact your local dealer or Xerox Representative for end of 

life take back information.

Two power specifications are listed below. The specifications that apply to your 

machine depend on your machine configuration and the requirements in your country.  

Connect the power plug only to a properly rated and grounded power outlet to avoid 

the chance of electric shocks.  If in doubt, contact your Xerox Sustomer Support 

Center.
1.  Rated voltage              120 V
     Rated frequency         50/60 Hz
2.  Rated voltage              220-240 V
     Rated frequency         50/60 Hz
Ensure that the plug connection is free of dust.  In a damp environment, a 

contaminated connector can cause connection problems over time.
Do not attempt to rework, pull, bend, chafe, or damage the power cord in any way.  Do 

not place heavy objects on the cord because that can also damage the cord.
Stop operation immediately if your machine produces smoke, excessive heat, unusual 

noises or smells, or if water, coffee, or other liquids are spilled on the machine.  

Immediately turn off the machine off and unplug it.  Then contact your Xerox Customer 

Support Center.

The machine is designed to operate normally within the following recommended limits:
Temperature range:     50 - 90 degrees Fahrenheit  (10 - 32 degrees Celsius)
Humidity range:           15 - 85% (no condensation)
At 47.5% humidity, the temperature should be 90 degrees F or below; and 

at 85% humidity, the temperature should be 82 degrees F or below.

• Sudden temperature fluctuations can affect copy quality.  Heating a cold room too quickly 

can cause condensation inside the machine, which can interfere with image transfer.