Black Box IC1000A Manual De Usuario
17
CHAPTER 3: Installation
2. If you haven’t already done so, follow the
hardware-installation instructions in Section 3.1.
After connecting the USB cable, the Add New
Hardware Wizard should appear. Click “Next.”
After connecting the USB cable, the Add New
Hardware Wizard should appear. Click “Next.”
3. Select “Search for the best driver for your device”
and click “Next.”
4. Select “Specify a location” and type in “X:\Win98”
(where “X” is the drive letter of your CD-ROM
drive). Then click “Next.”
drive). Then click “Next.”
5. Confirm that Windows is pointing to X:\Win98
(where “X” is the drive letter of your CD-ROM
drive). Click “Next.” Windows will then copy over
the driver files.
drive). Click “Next.” Windows will then copy over
the driver files.
6. Click “Finish” to complete the driver installation.
After installing the drivers, Windows will detect your
USB Director RS-232’s new COM ports and will begin to
initialize them. Installation is complete when no more
dialog boxes appear. Your new communication ports,
numbered sequentially following the existing ports in
your system, are now ready.
USB Director RS-232’s new COM ports and will begin to
initialize them. Installation is complete when no more
dialog boxes appear. Your new communication ports,
numbered sequentially following the existing ports in
your system, are now ready.