Compaq 177620-006 Manual De Usuario
C–2
Troubleshooting Guide
Drive Protection System (DPS)
Accessing DPS Through Compaq Diagnostics for Windows
To access DPS through Compaq Diagnostics for Windows, perform
the following steps:
the following steps:
1. Turn on the computer and select My Computer > Control
Panel > Compaq Diagnostics.
A choice of five possible headings appears in the Diagnostics
screen: Overview, Test, Status, Log, and Error.
screen: Overview, Test, Status, Log, and Error.
2. Select Test > Type of Test.
A choice of three tests appear: Quick Test, Complete Test, and
Custom Test.
Custom Test.
3. Select Custom Test.
A choice of two test modes is offered: Interactive Mode and
Unattended Mode.
Unattended Mode.
4. Select Interactive Test > Storage > Hard Drives.
5. Select the specific drives to be tested > Drive Protection System
Test > Begin Testing.
When the test has been completed, one of three messages will be
displayed for each of the drives tested:
displayed for each of the drives tested:
■
Test Succeeded. Completion Code 0.
■
Test Aborted. Completion Code 1 or 2.
■
Test Failed. Drive Replacement Recommended. Completion
Code 3 through 14.
Code 3 through 14.
If the test failed, the completion code should be recorded and reported
to your service provider for help in diagnosing the computer problem.
to your service provider for help in diagnosing the computer problem.
177620-006.book Page 2 Thursday, March 14, 2002 3:16 PM