Gateway ALR 9200 Manual De Usuario

9.

For proper operation, load the Setup program defaults. To load the 
defaults, press 

F

9

.

10.

To accept the defaults, press 

E

NTER

.

11.

Set the options in the Setup program to the settings you wrote down 
before the BIOS upgrade.

12.

To save the settings, press 

F

10

.

13.

To accept the settings, press 

E

NTER

.

14.

Turn off the computer and reboot.

It is unlikely that anything will interrupt the BIOS upgrade; however, if an 
interruption occurs, the BIOS may be damaged. In that case, you must 
recover the BIOS.

The procedure for recovering the BIOS is detailed in “Recovery Boot 
Jumper” on page 75. After performing the procedure, leave the upgrade 
disk in drive A and turn on the server, then continue with the BIOS upgrade 
(see “Upgrading the BIOS” on page 98).

You can use the BIOS upgrade utility to change the language the BIOS 
displays. Use a bootable diskette containing the flash utility and language 
files (see “Creating the BIOS Upgrade Diskette” on page 99).

1.

Boot the computer with the bootable diskette in drive A. The BIOS 
upgrade utility screen appears.

2.

Select 

.

3.

Select 

. Press 

E

NTER

.

4.

Select drive A and use the arrow keys to select the correct .lng file. 
Press 

E

NTER

.

To Change the BIOS Language

Because of the small 
amount of code available in 
the nonerasable boot block 
area, there is no video 
support. You will see nothing 
on the screen during the 
procedure. Monitor the 
procedure by listening to the 
speaker and looking at the 
diskette drive LED.

3424.boo  Page 101  Wednesday, September 2, 1998  9:23 AM