3com DK8X Manual De Usuario

 

<F8> Key 

Load Failsafe Defaults 

<F9> Key 

Load Optimal Defaults 

<F10> Key 

Save and Exit 

Home 

Go to Top of Screen 

END 

Go to Bottom of Screen

 

ESC Exit 

 

The BIOS does NOT automatically save values that you have modified. If you do not 

save your values before you exit the BIOS Setup Utility, all your changes will be lost.   

 

If after making and saving system changes with the BIOS Setup Utility, you discover that 

your computer is no longer able to boot, the AMIBIOS supports an override, which will 

reset your system to the Failsafe defaults. If that fails, it is possible to manually clear the 

present CMOS information through the "Clear CMOS Header" on the motherboard 

(Refer to Jumper Settings for more information). 

 

The best advice is to ONLY alter settings which you thoroughly understand. The default 

settings have been carefully chosen by AMIBIOS to provide the maximum system 

performance and reliability. Even a slight change to the chipset setup may cause potential 

and unpredictable failure to the system. 

 

 

 

 

 

 

________________________________________________________________________ 

3-3                                                                                                                                            BIOS Setup