Adaptec 2268300R Manual De Usuario

Appendix C: Using the Adaptec RAID Configuration Utility

●

107

Modifying Cache Settings

You can modify the read and write cache settings for an array. You can also modify the 
maxCache settings. Adaptec

 

maxCache uses the compatible Solid State Drives (SSDs) in your 

system as a fast read cache pool to improve performance in read-intensive applications. 

Note: 

maxCache Read Caching is supported on Adaptec Series Q controllers only. For more 

information about maxCache, see 

.

To modify the cache settings for an array:

1

Select Manage Arrays from the main ACU menu.

2

Select the array, then press Ctrl+C.

The Modify Cache Settings window opens.

3

Enable or disable read caching.

4

Press Tab.

5

Enable or disable write caching: 

●

Select Enable always for “write-back” caching

●

Select Enable with ZMM if your controller has battery backup or a zero-maintenance 
cache protection module

●

Select Disable for “write-through” caching

6

Press Tab.

7

Select the maxCache Read Cache setting (Enable/Disable).

8

Press Tab.

9

Press Enter to accept the values.

Power Off Drive After

The duration of inactive state of the array/drive after which it is powered 
off. This is an optional setting.

Note: 

Power Off Drive After duration should be greater than Slow 

Down Drive After Duration.

Verify Drive After

The regular time interval at which the system performs a health check of 
the array/drive.

Option

Description