Brady 76800 Manual De Usuario
Applying Color
8
-
7
Choosing color on the Multicolor and Color & Cut
systems
systems
If you have the Multicolor or the Color & Cut system, the options offered on the
Object Color screen also depend on the type of ribbon installed at the time you
choose the Color option.
Object Color screen also depend on the type of ribbon installed at the time you
choose the Color option.
Note:
The Autocut function cannot be applied in multicolor mode.
If you swap in a different ribbon during construction of the label or while editing it,
the Object Color screen changes according to the characteristics of the new ribbon,
as described in the following sections.
the Object Color screen changes according to the characteristics of the new ribbon,
as described in the following sections.
With a continuous color ribbon installed
The Object Color screen looks similar to Figure 8-2 when you have a continuous
color ribbon installed on your Multicolor or Color & Cut system:
color ribbon installed on your Multicolor or Color & Cut system:
Figure 8-2. Object Color screen, continuous color ribbon on the Color & Cut system.
Hint!
Use this screen to set object colors at composition time without having to
swap in each ribbon. You won’t have to swap in the different ribbons until
you print the label.
swap in each ribbon. You won’t have to swap in the different ribbons until
you print the label.
The color boxes
show the colors
available in
continuous color
ribbons.
show the colors
available in
continuous color
ribbons.
This box shows
the background
color (the tape
installed).
the background
color (the tape
installed).