Brady 76800 Manual De Usuario

Working with Cut-outs 

1. On the Main Menu screen, select Setup.

2. On the System Setup screen, choose the Hardware tab:

Figure 10-7. The System Setup Hardware tab

Write down the values (which were individually set at the factory) before 
you change them, in case you want to restore the defaults.

3. Enter a value in the Horizontal (x) field. The value must be a positive or 

negative whole number.

4. Enter a value in the Vertical (y) field. The value must be a positive or negative 

whole number.

5. Choose OK.

You must close down and restart your printer for new settings to take 
effect.